Filter
Top Products
5
Opening for
Front
Locking Tab
Shield
Cutting Head
Motor Housing
3. Ke ep f ront locking tab i n the m otor h ousing.
Cutting Head
Shield
4. Push shield toward motor housing until
rear locking tabs snap into rear notches.
An audible snap must be
heard. Ensure
the cutting head remains free to rotate
and the line is not caught between the
shield and the motor housing.
Shield
OPERATION
KNOW YOUR TRIMMER
READ THIS I NSTRUCTION M ANUAL A ND SAFETYRULES BEFOREOPERATING YOUR U NIT.
Compare the illustrations wi th your unit to familiarize yourse lf with the location of the various cont rols
and adjustments. Save this manual for futur e reference.
Cord
Retainer
Recessed
Plug
Trigger Switch
Assist Handle
Twist and Edge Button
Motor Housing
Edge Guide
Line Limiter Blade
Trimmer Head
with 0.065 inch
Trimmer Line
Debris Shield
Air
Vents
Locking
Sleeve
Assembly
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetriggerswitchtooperatethe
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRI M MER HEAD holds the cutt ing line
and rotates during operation.
TWIST AND EDGE BUTTON
The TWIST AND EDG E BUTTON is used to
twist t he lower portion of the unit into an edg-
ing position .
EDGE GUIDE
The EDGEGUID Eprotectsthe unitfromcon-
tacting the ground during edging.