Filter
Top Products
5
OPERATION
KNOW YOUR TRIMMER
READ THIS I NSTRUCTION M ANUAL A ND SAFETYRULES BEFOREOPERATING YOUR U NIT.
Compare the illustrations wi th your unit to familiarize yourse lf with the location of the various cont rols
and adjustments. Save this manual for futur e reference.
Cord
Retainer
Recessed
Plug
Trigger Switch
Assist Handle
Twist and Edge Button
Motor Housing
Edge Guide
Line Limiter Blade
Trimmer Head
with 0.065 inch
Trimmer Line
Debris Shield
Air Vents
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetriggerswitchtooperatethe
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRI M MER HEAD holds the cutt ing line
and rotates during operation.
TWIST AND EDGE BUTTON
The TWIST AND EDG E BUTTON is used to
twist t he lower portion of the unit into an edg-
ing position .
EDGE GUIDE
The EDGEGUID Eprotectsthe unitfromcon-
tacting the ground during edging.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on
your unit.
SELECT AN EXTENSION CORD
ExtensionCordGaugeChart
Length of Cord Gauge
25 Ft. (7.5 m)
50 Ft. (15 m)
100Ft.(30m)
18 Gauge
16 Gauge
16 Gauge
Extension cords are ava ilable for this unit.
AT TACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the ha ndle
and around the hook as shown. Insure the
plug and cord are firmly and fully engaged.
Cord Retainer
Extension Cord
CORRECT OPERATING POSITION
Trimming
Edging
WARNING: Always wear eyeprotec-
tion. Never lean over the trimm er head.
Rocks ordebris canricochetorbethrowninto
eyes and face and cause blindness or other
serious injury .