Filter
Top Products
10
Edging
Edging
Direction
SCALPING
The scalping technique removes unwanted
vegetation d own to the ground. Hold the bot-
tomofthetrimmerheadabout 3inches ( 8cm )
above the ground and at an angle. Allow the
tipoft helinetostrikethegroundaroundtrees,
posts, monuments, etc. This technique in-
creases line wear.
Scalping
MOWING
Your trimmer is ideal for mowing in places
conventional lawn mowers cannot reach. In
the mowing position, keep the line parallel to
the ground. Avoid pressing the head into the
groundas thiscanscalpthegroundanddam-
age the tool.
Mowing
SWEEPING
The fanning action of the rotating line can be
used fora quick andeasy cleanup. Keep t he
line parallel to and above the surfaces being
swept and move the tool from side to side.
Sweeping
MAINTENANCE
WARNING: Disconnect unit from
power source before performing mainte-
nance.
GENERALRECOMMENDATIONS
Thewarrantyonthisunitdoesnotcoveritems
that have been subjected t o operator abuse
or negligence. To receive full value from the
warranty , the operator must m aintain unit as
instructed in this manual. V arious adjust-
ments will need to be made periodically to
properly maintain your unit.
BEFORE EACH USE
CHECK FOR LOOSE
FA STENERS AND PARTS
S Housing Screws
S Debris Shield
CHECK FOR DAMAGED OR
WORN PARTS
Contact an authorized service dealer for re-
placement of damaged or worn parts.
S T rigger Switch -- Ensure switch functions
properly by pressing andreleasing thetrig-
ger switch. Make sure motor stops.
S Debris Shield -- Discontinue use of unit if
debris shield is damaged.
AFTER EACH USE
INSPECTAND CLEANUNIT AND LA -
BELS
S After each use, inspect complete unit for
loose ordamaged par ts. Never use adam-
aged trimmer .
S Clean the unit using a damp cloth with a
mild detergent.
S Wipe of f unit with a clean dry cloth.
S Use asoft brushto clean ar o und t heinside
ofthedebr isshield,thecuttingheadandthe
motor housing air vents.