Weed Eater 530087893 Blower User Manual


 
-- 3 --
D
Empty the fuel tank before storing the unit.
Use up fuel left in c arburetor by starting the
engine and letting it run until it stops.
D
Do not use any accessory or attachment
other than those recommended by the
manufacturer for use with your uni t.
D
Do not store the unit orfuel in aclosed area
where fuel vapors can reach sparks or an
open flame from hot water heaters, electric
motors or switches, furnaces, etc.
D
Store in a dry area out of reach of children.
SPECIALNOTICE:
For usersonU.S.For-
est Land and in some states, including Cali-
fornia(Public Resources Codes 4442 and
4443), Idaho, Maine, Minnesota, NewJersey,
Oregon, and Washington: Certain internal
combustion engines operated on forest,
brush, and/or grasscovered landin theabove
areas are required to be equipped with a
spark arrestor, maintained in effective work-
ing order, or the engine must be constructed,
equipped, and maintained for the prevention
of fire. Check with your state or local authori-
ties for regulations pertaining to these re-
quirements. Failure to follow these require-
ments is a violation of the law. This unit is not
factory equipped with a spark arrestor; how-
ever, a spark arrestor is available as an op-
tional part. If a spark arrestor is required in
your area, contact an Authorized Service
Dealer for the correct kit. The spark arrestor,
blower tubes, and nozzles must be as-
sembled to unit to be in full compliance with
regulations.
SPECIAL NOTICE:
Exposure to vibra-
tions through prolonged use of gasoline pow-
ered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people prone to circulation disorders
or abnormal swelling. Prolonged use in cold
weather hasbeen linked toblood vessel dam-
age in otherwise healthy people. If symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek
medical attention. An anti- vibration system
does not guarantee the avoidance of these
problems. Users who operate power tools on
a continual and regular basis must m onitor
closely their physical condition and the condi-
tion of this tool.
ASSEMBLY
NOTE:
It is normal for the fuel filter to rattle
in the empty fuel tank.
ASSEMBLY
WARNING:
If received assembled,
repeat all steps toensure your unit isproperly
assembled and all fasteners are secure.
D
No tools are required for assembly.
BLOWER TUBE
D
Push the blower tube into the blower outlet
until it snaps into place.
Blower Tube
Blower Outlet
USING YOUR UNIT
You MUST make sure the tube is secure be-
fore using the unit.
Eye
Protection
OPERATING
POSITION
OPERATING TIPS
S
Operate power equipmentonly at reasonable
hours--not ear ly in t he mor ning orlate at night
whenpeople mightbe disturbed.Comply with
times listed i n l ocal ordinances. Usual recom-
mendations ar e 9:00 a .m. to 5:00 p.m.,
Monday though Satur day.
S
To reduce noise levels, limit the number of
pieces of equipment used at any one time.
S
Use rakes andbrooms to loosen debris be-
fore blowing.
S
In dusty conditions, slightly dampen sur-
faces when water is available.
S
Conserve water by using power blower s
instead of hoses for many law n and garden
applications, including areas such as gutters,
screens, patios, grills, porches, and gardens.
S
Watch outforchildren, pets, open windows,
or freshly washed cars. Blow debris away
safely.
S
Use the full blower nozzle extension so the
air stream can work close to the ground.
S
After u sing blowers and other equipment,
CLEAN UP! Dispose of debris in trash re-
ceptacles.