Filter
Top Products
6.6 WATLOW Series 988 User’s Manual
Factory Menus, Chapter 6
Factory-Panel Lockout
Communications Menu
Select the lockout level for the Communications Menu. Set the
Communications Menu lockout to no lockout [none], read only [read] or
full lockout [FULL].
[COM] This prompt appears only on controllers equipped with
Communications hardware (98_ _ -_ _ _ _-_R_ _ or 98_ _ -_ _ _ _-_S_ _ ).
Default
↓
[none] [read] [FULL]
[COM] [COM] [COM]
Diagnostics Menu
Select the lockout level for the Diagnostics Menu. Set the Diagnostics
Menu lockout to no lockout [none], read only [read] or full lockout
[FULL].
[diAg] This prompt always appears.
Default
↓
[none] [read] [FULL]
[Diag] [diag] [diag]
Calibration Menu
Select the lockout level for the Calibration Menu. Set the Calibration
Menu lockout to no lockout [none], read only [read] or full lockout
[FULL].
[`CAL] This prompt always appears.
Default
↓
[none] [read] [FULL]
[`CAL] [`CAL] [`CAL]
[diag]
[`CAL]
[COM]
C6.wc 5/14/1999 8:52 AM Page 6.6