Watkins C45S Hot Tub User Manual


 
WARNING: Never leave an open spa unattended, especially if there are children present!
BUILDING A SANITIZER ROUTINE
During the first month of ownership, measure the sanitizer residual daily in order to establish standards for User Load and Usage Time versus Sanitizer Needed.
The User Load of the spa is the number of times anyone enters the spa.
The Usage Time is simply the amount of time a user spends in the spa.
Sanitizer Needed is the amount of Free Available Chlorine (FAC) needed to accommodate the number of users and their combined usage time.
For example, two spa users who regularly use the spa once an evening for twenty minutes create a specific and somewhat consistent demand on the sanitizer. During
the first month of ownership, these two users can determine exactly how much sanitizer to use in order to maintain the proper residual. If, at any time, the user load
and/or usage pattern changes dramatically (invited guests), the amount and frequency of sanitizer required increases dramatically.
The greater the usage time, or the bather load, the faster the residual value is diminished.
WATER QUALITY AND MAINTENANCE
WATKINS
®
WATER TREATMENT GUIDE
At spa startup or refill
Follow spa Start-Up and Refill Procedures.
Prior to each use
(Test before adding any chemicals; do not add any
chemicals if proper or higher levels are found.)
Add one-half (1/2) teaspoon of sodium dichlor per
250 gallons, OR Add one (1) tablespoon
monopersulfate (MPS)* per 250 gallons
* MPS is an oxidizer, not a sanitizer
Once a week
Add one and one half (1-1/2) teaspoons of sodium
dichlor per 250 gallons, OR Add three (3) tablespoon
monopersulfate (MPS)* per 250 gallons
Every four months
Drain and refill your spa.
Replace Monarch
®
silver cartridge
Follow spa Start-Up and Refill Procedures.
As needed
(If water is hazy, cloudy or has an odor)
Add one and one half (1-1/2) teaspoons of sodium
dichlor per 250 gallons.
18