Filter
Top Products
Maintenance Instructions ADJUSTMENTS
85
ADJUSTMENTS
Steering Levers
An adjustment range of approximately 3 in. (76 mm)
is available on the steering levers - the levers can be
adjusted forward or aft depending on the arm length
of the operator. The levers can be adjusted by loos-
ening the locknut at the pivot point and the locknut
holding the lever in position in the adjustment slide.
Adjust levers into most comfortable position and
tighten both locknuts.
Steering Lever Adjustment
Tilt-Up Deck Adjustable Stop
When the carrier frame hinge joint is properly adjust-
ed, the deck lock levers should move in and out of the
engaged and disengaged positions freely. Adjust-
ments are made by loosening the jam nut and tight-
ening or loosening the set screws on the Deck Mount
Pivot Brackets. Retighten the jam nut when the ad-
justment is complete.
Tilt-Up Deck Adjustable Stop
Adjustment
Slide
Locknut
(Pivot Point)
Locknut
(Position)
Set Screw
Jam Nut