Filter
Top Products
30
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
ITEM PART DESCRIP TION NO.
NO. NO. REQ’D
Use only genuine Walker
®
replacement parts. Effective Date 12-01-00
GHS 9.5 BUSHEL CATCHER & EXHAUST DEFLECTOR ASSEMBLIES
Upper Baffle Screen Assembly (Removable)
1 7509-3 Channel Bottom 2
2 7505 Mustache Spring 2
3 7507 7.0 / 9.5 Screen Seal, (27-1/2) 1
4 7856-1 7.0 / 9.5 Edge Molding, (26”) 1
5 7509-2 Channel Top
6 7512-2 7.0 / 9.5 Removable Screen 1
7 7506 Knob
8 7509-4 7.0 / 9.5 C-Channel 1
Exhaust Deflector Assembly
7504 Exhaust Deflector Kit, 7.0 / 9.5
*
9 7504-3 Hinge, Exhaust Deflector 1
10 7504-1 Exhaust Deflector (Two Piece Set) 1
11 7504-8 Deflector Mount Doubler 2
GHS 9.5 Bushel Catcher Assembly
**
12 5583 Handle 1
13 8516 Backup Plate, Door Sides 2
14 5588 Rubber Bumper (.75 OD x .50) 2
15 7514-1 Backup Plate, Catcher Door 1
16 8514-11 Door Frame, Catcher (9.5) 1
(Begin S/N 49198)
17 8510-1 9.5 Bushel Catcher, Including Door 1
8502-1 9.5 Catcher Assembly,
***
Without Powerfil
®
(Includes Door)
8502-2 9.5 Catcher Assembly
***
(Includes Powerfil
®
)
8502-4 9.5 Catcher Assembly
***
(Includes Frame & Powerfil
®
)
18 8513-3 Mount Frame Doubler (9.5) 1
(Begin S/N 49198)
19 8503-2 Mounting Frame (9.5) 1
(Begin S/N 49198)
20 5155-12 5/16 Ball Stud 2
21 5147 Spring Clip, Gas Spring 4
22 5155-10 Catcher Gas Spring Assembly 2
(Includes Items # 20, 21 & 24)
23 5524-1 Flanged Hinge Bearing 2
24 5155-13 3/4 Ball Stud 2
25 5523-6 Gas Spring Plate 2
26 7533 Backing Plate, Handle 2
27 7532 Handle, Catcher Lift 2
7534 Catcher Handle Kit
*
(Includes Items # 26, 27, F004 & F172)
28 5155-15 Box Support, Gas Spring 2
29 5522-1 Hinge Backup Plate, LH 1
30 7503-9 Pivot Bushing 2
31 7508 7.0 / 9.5 Safety Latch Hinge 1
32 5522-2 Hinge Backup Plate, RH 2
33 7584 Reinforcing Strap, Catcher Top 2
5598 Optional Dump Bag (Not Shown)
May be ordered as an option. Contact your Walker dealer.
Fasteners
F002 10-24 Keps Nut 15
F004 1/4-20 Keps Nut 19
F009 5/16-18 Whiz Locknut 2
F020 5/16-18 ESNA Nut 2
F025 10-24 x 3/8 PPHMS 4
F027 10-24 x 5/8 PPHMS 4
F035 5/16-18 x 1-1/4 Hex Bolt 1
F037 10-24 x 5/8 PTH Screw 4
F049 5/16 SAE Washer 4
F061 1/4 Internal Star Lock Washer 2
F079 A/A66D Aluminum Pop Rivet 33
F085 3/16 Rivet Backup Washer 16
F129 10-24 x 1/2 PTHMS 4
F172 1/4-20 x 3/4 Carriage Bolt 4
F188 1/4-20 Self Locking Nut 20
F195 1/4-20 x 3/4 PPHMS SS 8
F196 1/4-20 x 1 PPHMS SS 3
F198 .625 x .250 x .040 Washer, SS 5
F230 1/4-20 x 1-1/4 PPHMS SS 1
F242 1/4-20 x 7/8 PPHMS SS 23
F252 10-24 x 3/4 PFHMS 1
F255 5/16-18 x 1-1/2 Hex Bolt 1
F329 .260 ID x 1.939 OD Washer 2
F330 3/16 D x 21/32 L Rivet, SS 2
F351 Aluminum Pop Rivet 6
*
This kit is sold as a complete assembly, including mounting
hardware.
**
May be ordered as a factory-installed option.
Contact your Walker dealer.
***
Service Part Only