Filter
Top Products
General Information
1
HIGHLIGHTED INFORMATION
Walker Manufacturing recommends that any ser-
vice requiring special training or tools be performed
by an authorized Walker Mower Dealer. There are
several general practices to be aware of in the area
of safety. Most accidents associated with the oper-
ation or maintenance of a Walker product are
caused by disregarding basic safety precautions or
specific warnings. Such accidents, in most cases,
can be prevented by being aware of the dangers
present.
Information of special importance has been high-
lighted in bold type in this manual. Refer to Safety
Instructions for the meanings of DANGER, WARN-
ING, CAUTION, IMPORTANT, and NOTE.
GLOSSARY
There are many terms that are either unique to this
equipment or that are used as acronyms. The fol-
lowing terms and their definitions will help while us-
ing this manual.
• FORWARD SPEED CONTROL (FSC) controls
the maximum forward speed of the tractor; func-
tioning as a cruise control.
• IMPLEMENT refers to the dozer blade, rotary
broom, two-stage snowblower, or debris blower
used with the tractor with an implement hitch in-
stalled.
• LEFT HAND (LH) refers to the left-hand side of
the machine when the operator is seated facing
forward in the tractor seat.
• MACHINE consists of the implement installed
on the tractor, functioning as a single unit.
• POWER TAKE-OFF (PTO) transmits engine
power to run the rotary broom, two-stage snow-
blower, or debris blower.
• RIGHT HAND (RH) refers to the right-hand side
of the machine when the operator is seated fac-
ing forward in the tractor seat.
• TRACTOR is the prime mover, including the en-
gine, drivetrain, operator seat, and controls to
operate the implement.
IDENTIFYING NUMBER LOCATIONS
The implement hitch serial number is affixed to the
top of the male hitch assembly, underneath the
PTO shield. The dozer blade serial number is af-
fixed to the LH side of the hitch box on the back
side of the blade. The rotary broom serial number
is affixed on the RH side of the pivot bracket. The
snowblower serial number is affixed on the RH side
of the snowblower head frame. The debris blower
serial number is affixed to the top RH side of the
hitch. Model and serial numbers are helpful when
obtaining replacement parts and maintenance as-
sistance. For ready reference, please record these
numbers in the space provided.
Fill In By Purchaser
Implement Hitch Model No. _______________
Implement Hitch Serial No. _______________
Dozer Blade Model No. __________________
Dozer Blade Serial No. __________________
Rotary Broom Model No. _________________
Rotary Broom Serial No. _________________
Two-Stage Snowblower Model No. _________
Two-Stage Snowblower Serial No. _________
Debris Blower Model No. _________________
Debris Blower Serial No. _________________
Date of Purchase _______________________
IH6620
DB6660
RB6650
SB6670
DB6680