Filter
Top Products
— 11 —
MAINTENANCE
WARNING: THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
CLEANING OR SERVICING THE TILTING SKILLET.
WARNING: UNPLUG ELECTRICAL POWER SUPPLY.
LUBRICATION
Never grease or oil the pivot bearings as this may cause problems with tilting. Bearings are oilite and
never require lubrication.
VENT
Annually, when the tilting skillet is cool, check the flue and clear any obstructions.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this tilting skillet, contact the Vulcan-Hart Service
Agency in your area (refer to listing supplied with the skillet), or Vulcan-Hart Company Service
Department at the address or phone number shown on the front cover of this manual.
PROBLEM
Burner does not come on.
Skillet difficult to tilt.
POSSIBLE CAUSES
1. Gas supply to skillet is not on.
2. Manual shut-off valve is off.
3. Thermostat is not turned on.
4. The pan is not in the lowest position.
Dirt in oilite bearings causing it to bind. Contact
your local Vulcan-Hart authorized servicer.
TROUBLESHOOTING