Viper 5500 Swimming Pool Vacuum User Manual


 
22
©
2006 Directed Electronics—all rights reserved
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehi-
cle with the climate control system. If interior heating or cooling
is desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the
vehicle.
IMPORTANT! (1) Never remotely start the vehicle with the vehicle
in gear, and (2) Never remotely start the vehicle with the key in the
ignition.
To remote start the vehicle:
1. Press on the transmitter 2 times.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. Release the buttons as soon as the parking lights flash.
(In gasoline vehicles, the engine will start 4 seconds after
the parking lights flash. In diesel vehicles, the engine will
start when the WAIT-TO-START indicator on the vehicle's dash
goes out.)
4. Once the vehicle has started, it will run for the pre-program-
med period of time (either 12, 24, or 60 minutes - see
Programming Options section of this guide) or until a shut-
down input is triggered.
Remote Start