Vector VEC012B Portable Generator User Manual


 
11
ALWAYS RECYCLE
PRBA
PRBA
W
ARNING
• Do not dispose of the battery in fire as this may result in an explosion
Before disposing of the battery, protect exposed terminals with heavy-duty
electrical tape to prevent shorting (shorting can result in injury or fire)
• Do not expose battery to fire or intense heat as it may explode
Battery Disposal:
This unit contains a maintenance-free, non-spillable, sealed
lead-acid battery. This battery is fully recyclable and should be
accepted at any location that accepts common automotive
starter batteries. Examples of places that accept these batteries
are: County or municipal recycling drop-off centers, scrap metal
dealers and retailers who sell automotive replacement lead acid
starter batteries. For more information on recycling this battery,
call toll-free (877) 288-7722.
12 Volt DC
Power Source
Figure 2 - Jump ‘n Charge Controls and Indicators
Reverse Connection Light
Good Connection Light
Battery
Level Status
PUSH Button
Four Battery
Level Status
LEDs
JUMP ‘N CHARGE CONTROLS AND INDICATORS
Figure 2 shows the Jump ‘n Charge system control panel, and consists of:
• Four Battery Level Status LEDs indicating Low to High levels of battery level status
Battery Level Status (PUSH) button lights LEDs above.
Good Connection Light indicates a good clamp and terminal connection.
Reverse Connection Light indicates the clamps are reversed.
12 Volt DC Power Source Outlet for use with 12 volt DC appliances and recharge
from vehicle battery