Filter
Top Products
20
SERVICE AND ADJUSTMENTS
• Disengage belt tension rod (K) from locking bracket
(L).
•
Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower
pulley grooves.
M
• Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
engage slowly.
• Raise attachment lift lever to highest position.
• If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
FIG. 21
A
K
S
L
M
F
E
H
C
D
B