Troy-Bilt TB125QS Blower User Manual


 
9
This unit plug will only fit into a polarized extension cord
in one orientation. If the plug does not fully fit into the
extension cord, reverse the plug. If the plug still does not
fit, obtain a correct polarized extension cord.
A polarized extension cord will require the use of a
polarized wall outlet. This plug will only fit into a
polarized wall outlet in a specific orientation. If the plug
does not fit fully into the wall outlet, reverse the plug. If
the plug still does not fit, contact a qualified electrician
to install the proper wall outlet. Do not change the unit
plug, extension cord receptacle, or extension cord plug
in any way.
1. Secure the extension cord to the motor housing as
shown (Fig. 9). This prevents accidental removal of
the electrical cord.
OPERATING INSTRUCTIONS
CONNECTING THE POWER CORD
Use a minimum 25 foot (7.6 m) long, 16AWG, outdoor
electrical cord when using this unit. Other sizes include:
OFF
LOW
HIGH
Fig. 9
Fig. 11
STARTING/STOPPING INSTRUCTIONS
This unit is equipped with a three-way (OFF/ LOW/
HIGH) switch (Fig. 11):
Slide the switch all the way down for OFF.
Slide the switch up to the first click for LOW.
Slide the switch up to the second click for HIGH.
Once the unit is plugged in, stand in the operating
position (Fig. 12). Slide the power/speed switch to LOW
or HIGH to start the unit. To stop the unit, slide the
switch to OFF (Fig. 11).
Fig. 10
2. Plug the female end of the electrical cord into the
receptacle at the back of the unit (Fig. 10).
Receptacle
Cord length (ft.) 25 50 100 150
Wire size (AWG) 16 16 16 14
MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR
120 VOLT APPLIANCES USING 0-12 AMPS
To reduce the risk of
electrical shock, this
unit has a polarized plug (one blade is wider
than the other) and will require the use of a
polarized extension cord.
WARNING: