Troy-Bilt Pro-Line Tiller User Manual


 
Maintenance & Adjustments
6
15
WARNING! Before inspecting, cleaning or servicing
the machine, shut off the engine, wait for all moving
parts to come to a complete stop, disconnect the
spark plug wire and move the wire away from the
spark plug. Failure to follow these instructions can
result in serious personal injury or property damage.
Maintenance
Engine

all engine maintenance.
Tire Pressure
Check the air pressure in both tires. The air pressure should be

prevent machine from pulling to one side.
Hardware

hours and tighten or replace (as needed) before using tiller
Be sure to check the screws underneath the tiller hood that
secure the transmission cover and the Depth Regulator Lever to
the transmission.
Lubrication


Wheel Shaft
Tine Shaft
Handlebar
Attaching Screws
Depth
Regulator
Lever
Figure 6-1
Maintenance Schedule
Check After
first 2 hours
Before each
use
Every
5 Hours
Every
10 Hours
Every
30 Hours
See Engine
Manual
Check Motor Oil Level
P P
Clean Engine
P P
Check Drive Belt Tension
P P
Check Nuts and Bolts
P P
Lubricate Tiller
P
Check Gear Oil Level in Transmission
P
Check Tines for Wear
P
Check Air Pressure in Tires
P