Filter
Top Products
15
9
Part List:
Snow
Thrower
For parts and/or
accessories
please call
1-866-840-6483, or
1-330-558-7220.
www.troybilt.com
REF
NO.
PART No. DESCRIPTION Qty.
1 629-0071 Extension Cord 1
2 710-0409 Hex Screw, 5/16-24 x 1.75 4
3 710-0627 Hex Screw, 5/16-24 x .75 1
4 710-0654A Self Tapping Screw, 3/8-16 x 1 2
5 710-0751 Hex Screw, 1/4-20 x .62 1
6 710-1003 Screw, #10-16 x .625 2
7 712-04064 Hex Flange Lock Nut, 1/4-20 9
8 726-0154 Push Mount Cable Tie 1
9 684-04228 Auger Assembly 1
10 726-0205 Clamp, Hose 2
11 731-2825 Knob, Choke 1
12 736-0119 Washer, Lock 5/16 4
13 736-0242 Flat Washer .340 x .872 x .060 1
14 747-04236 Gas Tank Support Wire 1
15 750-04297B Spacer, Engine 4
16 751-0535 Hose, Fuel Line 18
17 751-10023 Tank, Fuel 1
18 751-10278 Cap, Fuel 1
19 754-0101A V-Belt, 1/2 1
20 756-0416B Pulley Half, .625 ID x 2.25 OD 2
21 756-04232 Pulley, 1/2 x 6.0 OD 1
22 790-00216 Bracket, Engine 1
23 790-00134 Bracket Support Gas Tank 1
24 7511152847 Primer Hose Line 4
25 7512B1476 Primer 1
26 734-04204 Wheel 5 Lug Diamond Design 2
734-04063 Wheel 7 x 1.5 STAR Gray 2
REF
NO.
PART No. DESCRIPTION Qty.
27 684-04168 Idler Pulley (1/4” hole) 1
28 735-04033 Rubber Paddle 2
29 710-0896 Hex Screw, 1/4-20 x .62 24
30 735-04032 Cresent Spiral 4
31 684-04228 Auger Assembly 1
32 710-0642 Hex Screw 1/4-20 x .75 Gr. 5 1
33 710-0653 Self-tapping Screw 1/4-20 x .375 1
34 712-0896 Hex Lock Nut 1/4-28 1
35 710-0352 Self-tapping Screw, 1/4-14 x .375” 6
36 712-04063 Hex Flange Lock Nut, 5/16-18 1
37 726-0299 Push Cap, 1/2” 2
38 750-04571 Shoulder Spacer .260 x .785 x .538 1
39 736-0329 Lock Washer, 1/4 1
40 736-0176 Flat Washer .265 x .938 x .120 1
41 741-04188 Ball Bearing .625 x 37 x 12 2
42 684-04227 Auger Assembly Housing 1
43 748-0234 Shoulder Spacer .25 1
44 738-0924A Carriage Screw 1/4-28 1
45 790-00249 Bearing Cup 2
46 790-00238 Idler Brkt. w/ brake (Pulley hole 1/4”) 1
47 790-00045A Belt Cover 1
48 710-0106 Hex Screw, 1/4-20 x 1.00 Gr. 5 1
49 756-0625 Cable Roller 1
50 732-0357A Extension Spring 1
NOTES: For a proper working machine,
use Factory Approved Parts. V-belts are
designed to engage and disengage safely.
A substitute (non OEM) V-belt can be
dangerous by not disengaging completely.
NOTE: Snow thrower features/components vary by model. NOT all parts listed above and pictured on the previous
page are standard equipment.
NOTE:
For painted parts,
please refer to the
list of color codes
below. Please add the
applicable color code,
wherever needed, to the
part number to order a
replacement part.
For instance, if a part
numbered 700-xxxx is
painted powder black,
the part number to
order would be 700-
xxxx-0637.
Troybilt Red - 0638
Black - 0637