Filter
Top Products
1. Never store unused material in spreader. Return
unused product to its original container.
2. Wash spreader thoroughly after each use and dry
completely in sun or heated area.
3. Oil the axle bearings, impeller shaft bearing in
hopper, control knob in
T-handle.
4. Remove gear cover and wash gears thoroughly.
Oil all bearing areas and face of gear teeth. Re-
install gear cover.
5. Gear mesh should be checked on a regular basis
during high use periods. Clearance between the
axle gear and pinion gear should be minimal but not
tight. If adjustment is necessary, loosen axle collar
set screw and hold gears together. Slide axle collar
against the gear support and tighten axle collar set
screw. Spin drive wheel. Gears should run freely
and smoothly.
6. Impeller surface should be cleaned periodically to
remove build-up of product. Build-up can cause the
spread pattern to change.
7. Tyre pressure should be 20-25 PSI.
MAINTENANCE
Oil
Oil Impeller Shaft
Bearing In Hopper
Axle Collar
Oil
Oil
Oil
WARRANTY
Sherriff Amenity warrants to Purchaser the following:
1. Product will be free of defects in materials and workmanship for a period of one year from date of purchase.
2. Sherriff Amenity will decide in its reasonable discretion if the part(s)/unit is defective.
3. The spreader or part(s) will be shipped to Sherriff Amenity at the customer expense with a written description of defect to the attention of Sherriff Amenity’s WARRANTY DEPARTMENT.
4. If the spreader is used for commercial rental the Limited Warranty shall be limited to a period of 90 days.
5. All Unit and part replacement will be performed at the reasonable discretion of Sherriff Amenity .
6. Labor charges are not covered and the unit need not be returned to the dealer for warranty service.
7. Proof of purchase must be supplied to Sherriff Amenity .
Sherriff Amenity's sole obligation under this warranty is limited to repairing or replacing the defective part. Upon replacement of any Product or Product part, the replaced item
shall become the property of Sherriff Amenity . If Sherriff Amenity determines that the Product covered by this warranty requires service, Sherriff Amenity shall prepay return shipping charges from
Sherriff Amenity .
In all other instances, such charges shall be paid by Purchaser. Except for loss or damage caused by Sherriff Amenity's negligence, Purchaser relieves Sherriff Amenity of responsibility for
all risks of loss or damage to the Product and its parts during the period the products are in transit to and from Sherriff Amenity .
This warranty does not extend to any Product or parts thereof that have been allowed to corrode, subjected to misuse, neglect, accident, or modification by anyone
other than Sherriff Amenity or that have been affixed to any nonstandard accessory attachment or that have been used, stored, installed, maintained or operated in violation
of Sherriff Amenity ’s instructions or standard industry practice. No agent, employee or representative of Sherriff Amenity has any authority to bind Sherriff Amenity to any affirmation,
representation or warranty concerning
the Product and any affirmation, representation or warranty made by any agent, employee or representative shall not be enforceable by
Purchaser.
THIS WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER AND IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS OR INTENDED USE FOR A
PARTICULAR PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF Sherriff Amenity .
SHERRIFF AMENITY SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL LOSS, DAMAGE OR EXPENSE DIRECTLY OR
INDIRECTLY ARISING FROM THE USE OF ANY OF THE PRODUCT INCLUDING, BUT NOT LIMITED TO, DAMAGE OR LOSS OF OTHER PROPERTY OR
EQUIPMENT,LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF
PURCHASER.