Filter
Top Products
5
To Assemble AKZ Cantilever Umbrella
1. Remove the umbrella and set it into the rotating hub in the
upright position (Fig.1).
(We recommend Two-Person team
lift for this part of the installation)
2. Locate two holes on bottom portion of main frame then place
the main frame into the rotating hub accordingly.
3. Insert hexagon machine bolts into holes, install acorn nuts
and tighten using large hexagon wrench (Fig.2).
4. Locate the crank lift handle (Fig.3) and install onto the
mid-area of the main frame. Use the small hexagon wrench
to lock in the small screw (Fig.3).
5. AKZ Umbrella is now ready to operate.
ASSEMBLY INSTRUCTIONS
11
FT. COMMERCIAL CANTILEVER UMBRELLA
(Fig.3)
(Fig.1)
(Fig.2)