Filter
Top Products
11
To Remove the Sprinkler Riser Assembly
1
Insert the multipurpose tool
into slot of riser cap.
Tilt tool back to lock it in.
2
Pull up riser and grasp rmly.
3
With multipurpose tool,
push seal retainer down hard to
release snap ring.
4
Insert multipurpose tool
into snap ring slot.
5
Twist and remove snap ring.
6
Carefully remove the riser
assembly. The spring will push
against your hand.
7
Insert the “hold up” tool into nozzle
notch and riser spring collar.
995-83
118-0954