Filter
Top Products
• Color coding by radius for
easy identification
• Complete selection of arcs for
all radius options — full,
3
⁄4,
2
⁄3,
1
⁄2,
1
⁄3 and
1
⁄4
• Uniform watering patterns
eliminate over and under
throw; refined design of
part-circle patterns for
better arc
• Precise radius/flow
adjustment, will not
lose adjustment
• 5' radius nozzles adjust to 3'
• Standard and special
spray patterns
• Patterns for small areas
• Full set of arcs for 10', 8'
and 5' radius nozzles
• 4'x18' side strip ideal for
parking lot medians
• 2'x6' for small planter beds
and other narrow areas
• 5 levels of trajectory
• Convenient nozzle packaging
— nozzles and screens
packed separately in
attached bags
• Fine-mesh filter screens
prevent clogging of
lower-gallonage nozzles
Specifications
• Operating pressure for
optimum nozzle performance:
30 PSI
• Recommended operating
pressure range: 20-50 PSI
• Maximum operating pressure:
75 PSI
• Adjustment screw allows up
to 25% reduction in radius
and complete shutoff
Toro 570 MPR Plus
Spray Nozzles
True matched
precipitation rates
and color coding
by radius are just
a few of the
unique features of 570
MPR Plus spray nozzles. Fits
any 570 pop-up body, shrub
adapter, riser extender or
shrub riser.
Features
• Matched precipitation rates
ensure that all nozzles (every
radius and pattern) apply
water at the same rate
• Low-flow rates allow for
more sprinklers to be placed
on the same zone
• PCDs eliminate fogging,
conserve water and provide
precise flow rates; standard
pre-installed or separately
XX
PC
Radius Arc Optional
5—5' Q—90° F—360° PC—Pressure Compensation
8—8' T—120° EST—End Strip
10—10' H—180° CST—Center Strip
12—12' TT—240° SST—Side Strip
15—15' TQ—270°
For Example:
When specifying a 570 MPR Plus Nozzle with a radius of 10',
a 180° arc and pressure compensation, you would specify:
Specifying Information — MPR Nozzles
XXX
10-H-PC
Apex at 30 PSI
Nozzle Max. Ht. of Spray
Series 27° 23° 12° 5° 0°
15' 4'8"
12' 3'7"
10' 2'4"
8' 2'2"
5' 1'6"
15'
8' 12' Special
Patterns
10' 15'
Radius-adjustment
screw provides 25%
radius reduction and
complete shutoff
Threaded to fit any Toro
570 pop-up body, riser
or adapter
Pressure-compensating
device maintains
constant performance
Color-coded band to
indicate radius
Precision-cut opening to
ensure true matched
precipitation rates
570 MPR Plus Nozzle