Filter
Top Products
Operation Section 4-8
OPERATION
RBF-14C 07/04
© 2004 Alamo Group Inc.
4. STARTING THE TRACTOR
Before starting the tractor ensure the following:
¾ Conduct all pre-start operation inspection and service according to the tractor operator’s manual.
¾ Make sure all guards, shields, and other safety devices are securely in place.
¾ The parking brake is on.
¾ The tractor transmission levers are in park or neutral.
¾ The boom operating controls are in the neutral and off positions.
¾ The PTO control lever is disengaged.
¾ The hydraulic remote control levers are in the neutral position.
Refer to the tractor owner’s manual for tractor starting procedures. Only start the tractor while seated and
belted in the tractor operator’s seat. Never bypass the ignition switch by short circuiting the starter solenoid.
After the tractor engine is running, avoid accidental contact with the tractor transmission to prevent sudden
and unexpected tractor movement.
DANGER!
Start the Tractor only when properly seated in the Tractor seat. Starting a Tractor
in gear can result in injury or death. Read the Tractor operator’s manual for proper
starting instructions. (SG-13)
DANGER!
Never run the Tractor engine in a closed building or without adequate ventilation. The exhaust
fumes can be hazardous to your health. (SG-23)
Essential Tractor Controls:
¾ Locate the ignition key/switch
¾ Locate the engine shut off control
¾ Locate the hydraulic control levers
¾ Locate the light control lever
¾ Locate the brake pedals and clutch
¾ Locate the PTO control lever
¾ Locate the 3-point hitch control lever
¾ Locate the boom operating controls (joystick or valve bank)
The operator must have a complete understanding of the placement, function, and operational use of all tractor and
boom operating controls before starting the tractor. Review the tractor operator’s manual and consult an authorized
dealer for tractor operation instructions if needed.