Filter
Top Products
Safety Section 1-13
SAFETY
RBC - 14C 07-04
© 2004 Alamo Group Inc.
WARNING!
Relieve hydraulic pressure prior to doing any maintenance or repair
work on the Implement. Place the Mower Head on the ground or
securely supported on blocks or stands, disengage the PTO, and turn
off the engine. Push and pull the control Levers or Joystick several
times to relieve pressure prior to starting any maintenance or repair
work.
(SBM-6)
DANGER!
Always disconnect the wire leads from the mower valve solenoid before
performing service on the Tractor or Mower. Use caution when working
on the Tractor or Mower. Tractor engine must be stopped before
working on Mower or Tractor. The Mower Blades could inadvertently be
turned on without warning and cause immediate dismemberment, injury
or death.
(SBM-12)
DANGER! All Safety Shields, Guards and Safety devices including
(but not limited to) - the Deflectors, Chain Guards, Steel
Guards, Gearbox Shields, PTO integral shields , and
Retractable Door Shields should be used and main-
tained in good working condition. All safety devices
should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items
must be replaced at once to reduce the possibility of
injury or death from thrown objects, entanglement, or
blade contact. (SGM-18)
DANGER!
DO NOT allow any person under a raised boom or mower head
unless it is securely locked up or supported. DO NOT approach the
Implement unless the Tractor is turned off and all motion has
ceased. Never work under the frame work, or any lifted component
unless the implement is securely supported or blocked up. Inadvertent
contact with the controls could allow a component to fall. A sudden
or inadvertent fall by any of these components could cause serious
injury or even death. (SBM-22)
WARNING!
Do not modify or alter this Implement. Do not permit anyone to modify or alter this Implement,
any of its components or any Implement function. (SG-8)
WARNING!
Always maintain the safety decals in good readable condition. If the decals are missing, damaged,
or unreadable, obtain and install replacement decals immediately. (SG-5)
DANGER! All Safety Shields, Guards and Safety devices including
(but not limited to) - the Deflectors, Steel Guards,
Gearbox Shields, PTO integral shields , and Retractable
Door Shields should be used and maintained in good
working condition. All safety devices should be in-
spected carefully at least daily for missing or broken
components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or
death from thrown objects, entanglement, or blade con-
tact. (SFL-5)