Teac SR-L35CD Landscape Lighting User Manual


 
13
ENGLISH
MEMORY/CLOCK ADJ
STOP
.m,/
To add a track to the end of the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until “00” appears on the
display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.
The track is added to the end of the program.
To clear program
In the stop mode, do either of the following to
clear the program:
< Press OPEN/CLOSE button (L) on top of the unit to
open the CD compartment.
< Press the MEMORY/CLOCK ADJ button and then
the STOP (H) button.
< If the unit is disconnected from the power supply
for more than 3 minutes, the programmed
contents will be cleared.
To cancel the program playback mode
Press the STOP (H) button. “MEMORY” indicator
disappears, but the programmed contents aren’t
lost.
To return to the program mode, press the
MEMORY/CLOCK ADJ button.
To check the programmed order
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly to show the track numbers that
have been stored in memory.
To overwrite the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until the track number to be
changed appears on the display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.