Filter
Top Products
30 TASCAM CD-RW900MKII
Titles can be given to the disc and the tracks on the disc, using
the TEXT EDIT option on the TEXT sub-menu.
NOTE
After a new title is selected and entered on the disc,
TOC will light up on the display. If the power is turned
off, the TOC has not been recorded on the disc and
the titles will not have be added. You must finalize
the disc to save the titles.
Follow the guidelines below to input titles on the screen. Operate
them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see “Title
input by keyboard” on page 31).
Select the type of character for input
Press the DISPL AY key on the unit or the remote control
to select from two different types of characters.
Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
Rotate the MULTI JOG dial or the SKIP key on the remote
control to get the desired characters on the display.
Push the MULTI JOG dial or press the ENTER key on
the remote control to enter.
To move the cursor position
Use the ∆/˙ key and the ˚/¥ key on the front
panel, or the SEARCH key on the remote control.
To delete characters
Place the cursor on the character, then press the
ERASE/DEL key on the front panel, or the ERASE key
on the remote control.
To insert characters
Move the cursor to the location where you wish to insert
a character, and press the FINALIZE/INS key on the
front panel or the FINALIZE key on the remote control.
To change a character
Place the cursor on the character to be changed, then
input the desired character.
NOTE
As with the TEXT menu, if you attempt to eject the
disc without writing the TOC to the disc, the display
will show Sure? Text!. If you want to eject the disc
without performing a TOC write, press the OPEN/
CLOSE key while “Sure Text!” is shown on the display.
The text that have been edited or entered will be
abandoned.
The disc or track title on a finalized disc cannot be
edited. Unfinalizing (CD-RW only) is needed in this
case to use the title input function.
Title input operation
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see “Operation basics” on page
16).
2. Rotate the MULTI JOG dial or repeatedly press the
SKIP keys on the remote control to select the track
number you wish to title.
3. Push the MULTI JOG dial or press the ENTER key
on the remote control.
Now, you can input or edit the track title following
the guidelines above.
4. Press the MENU key to enter.
If you want to cancel, press the STOP key.
Track title input
Disc title input
1. While stopped, select the TEXT EDIT option in the
TEXT sub-menu (see “Operation basics” on page
16). Text> Disc will appear.
2. Press the MULTI JOG dial or the ENTER key on the
remote control.
Now, you can input or edit the disc title following
the guidelines above.
3. Press the MENU key to enter.
If you want to cancel, press the STOP key.
7 − Titling