Tanaka TBC-340PF/PFD Brush Cutter User Manual


 
www.tanaka-usa.com 6 custsvc@tanaka-ism.com
Owner’s Manual
TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD
TBC
-
270P
N/P
N
D
,TBC
-
300/SDH/3010,TBC
-
340/D
,TBC
-
340PF/D
Throttle wire/stop cord
Remove the air cleaner cover. (Fig. 1-4)
Connect stop cords. (Fig. 1 -5)
Cover throttle wire and stop cords together with protective tube
provided up to air cleaner cover. (Fig. 1 -7)
Connect throttle wire end to carburetor. (Fig. 1 -6)
Installation of blade guard (Fig. 1-8, 8B)
Install the blade guard on the drive shaft tube against the
gear case.
Tighten the guard bracket firmly so that the blade guard does
not swing or move down during operation.
When using a trimmer head (2), locate the guard above
the gear case. (Fig. 1-8C, 8D,8E)
CAUTION!
Some blade guards are equipped with sharp line limiters. Be
careful when handling it.