Tanaka TBC-340PF/PFD Brush Cutter User Manual


 
www.tanaka-usa.com 1 custsvc@tanaka-ism.com
Owner’s Manual
TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD
TBC
-
270
PN/
PND,TBC
-
300/SDH/3010,TBC
-
340/D
,TBC
-
340PF/D
Before using this unit:
Read the operator’s manual carefully.
Check that the cutting equipment is correctly assembled
and adjusted.
Start the unit and check the carburetor adjustment.
See “Maintenance”.
WARNING
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Always wear eye, head and ear
protectors when using this unit.
It is important that you read, fully understand and
observe the following safety precautions and
warnings. Careless or improper use of the unit
may cause serious or fatal injury.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Keep all children, bystanders and
helpers 15m (50 ft) away from
unit. If anyone approaches you,
stop the engine and cutting
attachment immediately.
Shows maximum shaft speed. Do
not use the cutting attachment
whose max rpm is below the shaft
r
p
m.