Filter
Top Products
Operating Manual
Operation
PN 8500-0150, Rev. A, May 2005 20
Response Format:
Enter 1 PPS Offset (not implemented)
Command Format:
Description:
yyyyyy.yyy - 1 PPS Offset; yyyyyy.yyy (0 to 999999.999 microseconds) is amount of extra
delay applied to the 1 PPS output. It is added to the unit zero point and the resync side load
value.
Response Format:
Request Setup Parameters
Command Format:
Note 1: Start-up Parameters
N Dynamic Gain Time
1 .1 360
299 1140
3 60 1740
4 30 2760
520 0
611 0
Note: There is a hardware limitation on the resync control of approximately
±12 microseconds. Any 1 PPS offset values outside of this range will change the zero
point but not the resync value.