Filter
Top Products
CUSTOMER RESPONSIBILITIES
V-Belts
Check V-belts for deterioration and wear after 100 hours of operation and replace if
necessary. Replace belts if they begin to slip from wear. SEE SPECIFICATION for belt
part numbers and SERVICE section of this manual for instructions on how to replace the
belt.
Engine
REFER TO YOUR ENGINE OWNERS MANUAL
Overall Unit Care
¾ Reduce the risk of fire by removing grass, leaves, and other debris that may
have accumulated on the machine. Allow the machine time to cool before
cleaning or putting it in storage.
¾ Wash mower periodically. Clean above and below deck.
¾ Keep all electrical connections clean and tight.
Driving and Transport on Public Roads
¾Check applicable road traffic regulations before driving and transporting on public
roads.
¾If the machine is transported, you should always use approved fastening equipment
and ensure that the machine is well anchored.
¾The cutting deck should also be lowered to the lowest position and the parking brake
engaged.
14
14