Filter
Top Products
3
IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME
6
Position the Bottom Support Channels (long “L” shaped pieces) at the bottoms of the
Posts according to the illustration below for your size deck.
Note the different sizes. (The illustrations are as viewing the deck from above with the
Ladder to be installed on the left side.)
15’ END DECK
&
18’ END DECK
12’ END DECK
73-3/4”
58-7/8”
POOL
73-3/4”
58-7/8” 58-7/8”58-7/8”
73-3/4”
73-3/4”
POOL
75” 73-3/4”
58-7/8” 58-7/8” 58-7/8”58-7/8”
75” 73-3/4”
Having positioned the Bottom Support
Channels in their proper locations as
illustrated above, attach them to the
bottom of the Posts (including the Post
for the Ladder) using 1/2” Sheet Metal
Screws as shown at right.
1/2” SHEET
METAL SCREW
BOTTOM SUPPORT
CHANNEL
1/2” SHEET
METAL SCREW
BOTTOM
OF POST
NOTE: On the 12’ End Deck, you must now attach
1 side of remaining 72½” Bottom Support Channel
to the outside Posts nearest the pool. See right.
12’ END DECK
52-5/16
15’ END DECK
66-3/4
18’ END DECK
79-7/16