Filter
Top Products
Assembling Your Tower Fan
6
Remove the screws from beneath the tower
Using a phillips head screwdriver, remove the
6 screws from underneath the tower.
Put the screws aside. You will need them to
secure the base.
1.
2.
Lower the tower onto the base
Feed the cord through the hole in the centre
of the base.
Align the tower so that the lug on the base
lines up with the large hole in the bottom of
the tower, as shown.
Push the tower down onto the base until it is
fi rmly held into position.
1.
2.
3.
sun_7500.indd Sec1:6 8/07/2008 18:26:22