Filter
Top Products
Using Your Tower Fan
8
Switching the fan on
Place the fan on a fl at level surface.
Insert the plug into a 230/240V power outlet
and turn the power on.
Press the power button
.
Press the fan speed button
to select
low, medium or high depending on your
preference.
1.
2.
3.
4.
Switching the fan off
To switch the fan off, simply press the power
button
.
While the fan remains plugged in to the
power socket, the fan will remember your last
fan speed, oscillation and mode setting for
the next time you switch the fan on again.
If you will not be using the fan for a length of
time, it is advisable to turn the power off at
the wall socket and unplug the power cord.
•
•
•
Selecting a fan speed setting
Your Sunbeam tower fan has 3 speed settings
as follows:
low speed fan speed light turns red
medium speed fan speed light turns orange
high speed fan speed light turns green
To select a fan speed, simply press the fan
speed button
on the tower or the remote.
Each press of the button will increase the
fan speed and then return back to the lowest
speed again.
•
•
•
sun_7500.indd Sec1:8 8/07/2008 18:26:26