Filter
Top Products
Owner’s Manual — Sunlawn EM-1
7
ADJUSTING THE CUTTING HEIGHT
The cutting height of the EM-1 may be adjusted from approximately
1/2 inch up to approximately 2 1/4 inches. Actual height may vary
according to the height of the turf. Adjust the mower to the desired
height as follows:
1. Loosen the two large black knobs, one on each side of the mower
body, to allow movement of the roller arms. NOTE: the handle is
mounted to the roller arms and thus moves with the arms.
2. Set the height, using the scale on the back of the roller arms, to the
same setting on both sides and re-tighten the black knobs. The
mower is now ready to mow at the desired height setting.
STARTING AND OPERATION
WARNING
• Before starting the mower, check within the blade area for any
foreign objects and remove them.
• Do not operate the mower on areas other than turf surfaces.
The mower should be sitting on its wheels on a level part of the
lawn before starting operation.
!