Filter
Top Products
Owner’s Manual — Sunlawn EM-1
5
NOTE: The two batteries are identical. Connect the batteries as
follows:
1. Remove the orange power key from its position on the circuit board
to disengage the motor circuit.
2. Attach the WHITE jumper cable from the + (positive) terminal of
one of the batteries to the – (negative) terminal of the other
battery.
3. Attach the BLACK cable to the - (negative) terminal of the first
battery.
4. Attach the RED cable to the + (positive) terminal of the second
battery.
CHARGING THE MOWER BATTERIES
The mower does not arrive fully charged. The batteries must be
charged before using the mower.
OPERATION
CAUTION
!
Use only the charger provided
with this mower