Filter
Top Products
GB-1
ENGLISH
Hedge Trimmer
1. Introducing the Hedgetrimmer
Technical data SH 54
Operating voltage
Nominal frequency
Nominal consumption
Cutting movements
Cutting length
Cutting thickness
Weight (without flex)
Noise pressure level: 87 dB (A) according to EN 50144-1
Vibration: 2,4 m/s
2
according to EN 50144-1
Class of protection: II / DIN EN 50144/VDE
2. General safety instructions
Machine noise information regulation 3, GSGV: the noise
pressure level at the place of work can exceed 85 dB(A).
In such cases the operator will require noise protection
(e.g. wearing of ear protectors).
Attention: Noise protection ! Please observe the
local regulations when operating your device.
Interference suppressed in accordance with EN
55014, EN 61000-3-2:95, EN 61000-3-3:95 .
We reserve the right to make changes to the technical
specifications.
The hedge trimmers are constructed in line with the latest
regulations in accordance with DIN-EN 50144-1and DIN-
EN 50144-2-15 and conform fully to equipment safety
law regulations.
General safety instruction
Usage of hedge trimmer always involves a risk
of accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the
latest technology and in accordance with the
recognised technical safety regulations. Never-
theless, use of the machine can involve risks to the
user or third persons, and can cause damage to the
machine or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instructions to
protect yourself against electric shock, against dan-
ger of injuries and danger of fire. Read all these
instructions before using the hedge trimmer and
observe them. Keep these safety instructions at a
safe place.
Use the machine in a safety conscious manner for
suitable applications in a technically per-fect condi-
tion only and with due regard to the operating
instructions! Immediately rectify or have rectified
any faults which could adversely affect safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the maintenance
and the proper use of the hedgetrimmer. Familiarize
yourself with the machine before the first use and
also have yourself introduced to practical use of the
machine.
3. Application
The machine is only intended for trimming hedges.
Use for any other purpose constitutes inappropriate
use. The manufacturer / supplier is not liable for any
injury and/or damage arising from inappropriate
use. This risk is the sole responsibility of the user.
Appropriate use of the machine also includes adher-
ence to the operating instructions and compliance
with the servicing and maintenance instructions.
Always keep the operating instructions close at hand
during operation!
4. Safety instructions
1. Keep your working area tidy. Disorder at your
working area may lead to accidents.
2. Please consider environmental influences. Do not
expose power tools to rain. Do not use power
tools in wet or moist surroundings. Ensure that
there is good lighting. Do not use power tools
near inflammable fluids or gases.
3. Keep children away. Do not allow other persons
to touch the power tool or cable. Keep other per-
sons out of your working area.
4. Keep your power tools in a safe place. Power tools
that are currently not in use should be stored in
a dry place where they are out of reach of children
(high on a shelf or in a locked place).
5. Do not overtax your power tools. They work better
and safer if used within the stated performance
range.
6. Always disconnect the plug from the mains socket
before carrying out any work on the equipment,
before cleaning and before moving the equipment.
7. The use of hedge trimmers involves certain risks.
V~
Hz
W
min
-1
mm
mm
kg
230
50
500
3400
550
18
2,7