Filter
Top Products
6
ENGLISH
GB
Generally garden shredders require little mainte-
nance. To maintain their efficiency and a long life,
observe the following:
- keep vent slits clean and free from obstructions.
- check the locking screws (tighten where ne-
cessary).
- clean the device after shredding.
- the shredder should not be cleaned with high
pressure cleaners or running water.
- treat the cutting roller after every use with a
biodegradable spray oil as protection against
corrosion.
- the cutting roller and shaving plate are ex-
pendable parts, though with normal use and
correct adjustment they have a service life of
many years.
SPECIFICATION
SERVICE
Authorised service agents carry out repairs and
service. They use genuine spare parts.
Do you do basic repairs yourself? Then make sure
you use genuine spare parts. They fit immediately
and make your task easier.
When ordering spare parts please state the model,
part number and serial number. This information is
on the rating plate on the machine.
Do not fit any parts other than genuine
spare parts. This is a requirement of the
Testing Institute. The machine has been
tested and approved with these parts.
The manufacturer reserves the right to modify the prod-
uct without prior notice.
GUARANTEE
This guarantee is valid for one year from the date
of purchase.
Any defects due to faulty materials or workman-
ship will be repaired free of charge at an authorised
service station.
Any machine returned by the purchaser for repair
must be in a clean condition.
Carriage costs to and from the service station are
the responsibility of the purchaser.
This guarantee does not apply to: Routine wear.
Careless use. Personal injury or damage to proper-
ty. Machines that have been repaired at an unau-
thorised workshop.
Model 2000
Name of model AH 280
Motor AC-motor 230 V, 50 Hz,
S6 = 40% ED,
2800/40 min
-1
Motor rating P
1
= 2000 W
On/Off switch With overload protection
With cutting and reverse
function
Weight 26 kg
Acoustic pressure
level at work L
PA
(MeasuredtoRAL-UZ54,
DIN 45635Teil 1/05.84)
79 dB (A)
Acoustic capacity
level L
WA
(MeasuredtoRAL-UZ54,
DIN 45635Teil 1/05.84
86 dB (A)
Max. branch
diameter
(only for
fresh cut wood)
40 mm
Safety class I