Filter
Top Products
17
ENGLISH
GB
STEERING CHAINS (Pro16 - Pro18 -
Pro20)
Adjust the steering chains after every 50 hours of
operation.
Put the machine in the straight-ahead position.
Tension the steering chains by tightening up the
nuts that are located on the underside of the articu-
lated steering joint (fig. 27). Tension until all play
is removed.
Adjust both the nuts the same amount to ensure
that the alignment of the steering wheel is not
changed.
Do not over-tighten the steering chain. This will
cause the steering to become heavy and will in-
crease wear on the steering chain.
PATENT –
PROTECTION OF DESIGNS
This machine, or parts thereof, is protected by the
following patent and protection of design:
9900627-2 (SE), SE00/00250 (PCT), 9901091-0
(SE), SE00/00577 (PCT), 9901730-3 (SE), SE00/
00895 (PCT), 9401745-6 (SE), SE95/00525
(PCT), 595 7497 (US), 95920332.4 (EPC).
99 1095 (SE), 499 11 740.9 (DE), M1990 000734
(IT), 577 251-253 (FR), 115325 (US).
STIGA reserves the right to modify the product without giv-
ing any prior notice.