Filter
Top Products
7
ENGLISH
GB
Nm.
In the event of a powerful collision, the blades may
be bent out. Undo the locking nut X and fold back
the blade. Install a new original break bolt V.
Tighten the locking nuts X and Z.
POSITIVE DRIVE BELT
Both blades are powered inside the deck by a
positive drive belt.
If one of the blades has struck a solid object (e.g. a
stone), the belt tension may be altered. This can
lead to the positive drive belt ‘over-meshing’
which, in the long term, can damage the blades.
Following a powerful collision, always
check that both blades are at right-
angles to each other (fig. 11).
The working areas of the blades overlap each
other. If the blades’ position in relation to each
other has been altered, there is a considerable risk
of the blades striking each other. This can entail
serious damage to the cutting deck.
If this is the case, take the machine and cutting
deck to a service workshop for repair and
inspection.
SPARE PARTS
STIGA original spare parts and accessories are
designed specifically for STIGA machines. Please
note that ‘non-original’ spare parts and accessories
have not been checked or approved by STIGA.
The use of such parts and accessories
can affect the function and safety of the
machine. STIGA accepts no
responsibility for damage or injuries
caused by such products.
PATENT - DESIGN
REGISTRATION
This machine or parts thereof is covered by the
following patent and design registration:
9902299-8 (SE), SE/00/01222 (PCT)
STIGA reserves the right to make alterations to the
product without prior notification.