Filter
Top Products
BASIC ASSEMBLY
To properly assemble this heater you need the supplied assembly wrench and Allen wrench (or one of your
own). Refer to the parts diagram on page 5 while assembling the heater.
1) First, attach the base pole (F) to the weighted base (B) using the 3 base bolts (H). Once you secure the
base pole to the weighted base (B), remove the middle pole (E) and height adjuster from the bottom pole
(pull and turn the height adjuster clockwise). Place the decorative cone (C) over the base pole (F) to cover
the bolts on the base and reattach the middle pole and height adjuster.
2) Next, place the power cord attached to the heater head (A) through the middle of the top pole (D). The top
pole (D) will have two smaller screw holes located at the top. Align the small screw holes with the holes
on the bottom of the heater head. Use the small heater head connector screws (G) to secure the heater head
(A) to the top pole (D).
3) Now, find the middle pole (E) and place the power cord through the middle of the pole, bottom pole, and
weighted base. Screw the top of the middle pole (E) into the bottom of the top pole (D).
6