Filter
Top Products
Assembly
Parts List
• Mulch plug
• Grass catcher bag
• Discharge chute
• 24V Battery
• Battery Charger
• Manual
Note:
• Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no breakage
or damage occurred during shipping.
• Do not discard the packing material until all parts have
been examined.
Assembling the Handle (Fig. 2)
1. Remove any packing material which may be between
the upper and lower handles for shipping purposes.
2. Pull up and back on the upper handle to raise the
handle into the operating position. Make certain
the lower handle is seated securely into the handle
mounting bracket.
3. Align the holes between the upper handle and lower
handles. Insert the bolts and tighten them with the
wing nuts provided.
4. Secure the lower handle to the bracket with the handle
knob in each side. (Fig. 2)
Installing the Grass Catcher Bag (Fig. 3)
1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE
TO COME TO A COMPLETE STOP.
2. Lift the chute cover.
3. While holding up the cover, place the grass catcher
bag hanger hooks into the opening on the chute cover
to allow the hanger hooks to attach to the rod which
secures the chute cover.
NOTE: For optimal performance empty grass bag often during
use. A full grass bag will inhibit performance of the mower and
collection of grass clippings.
Install the Side Discharge Chute (Fig. 4)
This mower has 3 different functions-mulch, side discharge,
and rear bag. If you wish to discharge the clippings rather than
mulch, perform these steps.
1. UNPLUG THE POWER CORD, AND WAIT FOR BLADE
TO COME TO A COMPLETE STOP.
2. Lift the side discharge cover (1).
3. Align the grooves on the discharge chute (2) with the
pins on the underside of the discharge cover (1).
4. Lower the discharge chute until the hooks on the
mower deck are secured in the openings in the
discharge chute (2).
5. Release the side discharge cover (1).
5
Fig. 3
Fig. 4
Fig. 2
1
2
2