Filter
Top Products
STEP 18: Install bags onto cross assembly by
hooking slot in bag hanger onto tabs in channel
assembly.
STEP 19: Close cover and lock in place by hook-
ing lock knob into slot in cover latch arm.
STEP 20: Slip one hose clamp onto each end of
hose (use the clamp with the black quick-release
knob at the blower end), and install hose between
blower and bagger. Make sure to fit hoses firmly
onto adapters. Tighten clamps securely.
unit assembly
3
9
SLIP SLOT IN GRASS
BAG HANGER ONTO
TAB ON CROSS
ASSEMBLY
INSERT,
THEN MOVE
OVER AND
UP TO LOCK
CLAMP
WITH
NUT
CLAMP
WITH
BLACK
KNOB