Filter
Top Products
10
51-3845, 7/04
SAFETY SIGNS AND LABELS
Care of Safety Signs
1. Keep safety signs clean and free from obstructing
material.
2. Clean safety signs with soap and water; dry with a
soft cloth.
3. Replace damaged or missing safety signs with new
signs from SWEEPSTER.
4. If a component with safety sign(s) affixed is re-
placed with a new part, make sure the new safety
sign(s) is (are) attached in the same location(s) as
the replaced components.
5. Install new safety signs on clean surfaces only.
Spray a weak solution of soap and water on the
surface before applying the safety sign. This will
allow repositioning of the label. Squeegee any
bubbles to the outside edge.
__________________________________________
Item Part Description
1. 50-0103 Label, Caution, To Avoid Injury
2. 50-0104 Label, Danger, Lock-Collar, Unlock-Collar
3. 50-0115 Label, Danger, Rotating Drive
4. 50-0145 Label, Warning, Rotating Broom
5. 50-0394 Label, Danger, Rotating Drive Line
6. 50-0076-1 Label, Caution, Pinch Point
7. 50-0213 Label, Warning, Rotating Driveline
Locations
SAFETY SECTION