Filter
Top Products
HANDLES AND CONTROLS (2002 & Later Model Year)
Footnotes:
TP 400-5076-5-WB-N
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
7
Part No Descri
p
tionItem Qt
y
Note
1 7035954 1 CONTROL, Blade (ELP21502KWV)
1 7041734 1 CONTROL, Blade (ELP21602 & ELP21602E)
2 7028815 1 WELDMENT, Ground Speed Control (Coated)
3 7091645 1 PIN, 5/16 x 1-7/16” Clevis
4 7029036 1 CONTROL, Throttle (+49.8/1.41”) (ELP216752BV)
4 7075712 1 CONTROL, Throttle (+49.8/2.62”) (ELP21702BV)
5 7023655 1 KNOB, Engine Speed & Ground Speed Control
6 7029431 1 DECAL, (OPC) Operator Presence Control
7 7029432 1 DECAL, Ground Drive, (Cast Al Comm)
8 7091076 6 WASHER, 5/16” Flat
9 7091644 1 PIN, 5/16 x 1-3/4” Clevis
10 7028886 1 CONTROL, Ground Speed (+56/1.85”)
11 7026216 1 GRIP, Foam (7/8” I.D. x 21-1/2” long)
12 7091732 2 SCREW, 1/4-20 x 2-3/4” Hex Head Cap, GR 5
13 7074451 1 *CABLE ASSEMBLY, Blade Control (49.09” long) used on ELP216752BV
(#7084716)
13 7074923 1 *CABLE ASSEMBLY, Blade Control (51.39” long) used on ELP216752BV
(#7084669)
14 7023153 1 CLAMP, Engine Speed (3-Speed Control)
15 7023154 1 SCREW, #10-32 x 5/8” Slotted Hex Head, Self-Tap
16 7091017 1 SCREW, #8-32 x 3/8” Pan Head Cross Recess
17 7090391 2 WASHER, 5/16” Internal Tooth Lock
18 7091646 4 NUT, 5/16-18 Hex Nyloc
19 7026436 1 CLAMP, Double Tube
20 7011791 1 RETAINER, 5/16” Bolt (Black)
21 7034329 2 BRACKET, Handle (Black)
21 7034848 2 BRACKET, Handle (Yellow Zinc Chromate)
22 7091190 4 BOLT, 5/16-18 x 1-1/2” Curved Head Carriage, GR 2
23 7076978 4 NUT, 1/4-20 Hex Nyloc
24 7034786 1 HANDLE, Upper
25 7022779 1 GUIDE, Pull Rope
26 7024641 4 TIE, Wire 1.29” long (Black)
27 7073821 3 PIN, Bow-Tie Locking Cotter
28 7046518 1 CABLE, Traction (Adjustable) (51.20/6.38”)
29 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
30 7091702 2 WASHER, 3/16” Flat
31 7091298 4 NUT, 5/16-18 Hex Nyloc
32 7091018 1 NUT, #8-32 Hex
33 7026219 4 CLAMP, 7/8” Double Cable
*NOTE: Snapper part number and revision level is stamped into cable