Filter
Top Products
HANDLES AND CONTROLS (2001 Model Year)
Footnotes:
TP 400-5076-5-WB-N
Manual No. 700620221" CAST DECK WALK BEHIND MOWER
SERIES 2
5
Part No Descri
p
tionItem Qt
y
Note
1 7035954 1 CONTROL, Blade (ELP21502KWV)
1 7041734 1 CONTROL, Blade (ELP21602 & ELP21602E)
2 7028815 1 WELDMENT, Ground Speed Control (Coated)
3 7091645 1 PIN, 5/16 x 1-7/16” Clevis
4 7029036 1 CONTROL, Engine Speed (+49.8/1.41”) used on ELP21602 &
ELP21602E
4 7026467 1 CONTROL, Engine Speed (+49/2”) used onELP21502KWV
5 7028396 1 KNOB, Engine Speed & Ground Speed Control
6 7029431 1 DECAL, (OPC) Operator Presence Control
7 7029432 1 DECAL, Ground Drive, (Cast Al Comm)
8 7091076 6 WASHER, 5/16” Flat
9 7091644 1 PIN, 5/16 x 1-3/4” Clevis
10 7028886 1 CONTROL, Ground Speed (+56/1.85”)
11 7026216 1 GRIP, Foam (7/8” I.D. x 21-1/2” long) used on ELP21502KWV
11 7074422 1 GRIP, Foam (1” x 21-1/2” long) used on ELP21602 &
ELP21602E
12 7091251 2 SCREW, 1/4-20 x 2-1/2” Hex Head Cap, GR 5
13 7028803 1 *CABLE ASSEMBLY, Blade Control (48.88” long) used on ELP21602 &
ELP21602E (Snapper P/N &
Rev. # stamped on cable)
13 7028883 1 *CABLE ASSEMBLY, Blade Control (51.97” long) used on ELP21502KWV
(Snapper P/N & Rev. # stamped
on cable)
14 7023153 1 CLAMP, Engine Speed (3-Speed Control)
15 7023154 1 SCREW, #10-32 x 5/8” Slotted Hex Head, Self-Tap
16 7035744 2 KNOB, 5/16-18 Thread
17 7090391 4 WASHER, 5/16” Internal Tooth Lock
18 7091646 4 NUT, 5/16-18 Hex Nyloc
19 7026436 1 CLAMP, Double Tube
20 7011791 1 RETAINER, 5/16” Bolt (Black)
21 7034329 2 BRACKET, Handle (Black)
21 7034848 2 BRACKET, Handle (Yellow Chromate)
22 7091189 2 SCREW, 5/16-18 x 2” Square Neck Curved Head
23 7076978 4 NUT, 1/4-20 Hex Nyloc
24 7046995 1 HANDLE, Upper (ELP21502KWV)
24 7040950 1 HANDLE, Upper (ELP21602 & ELP21602E)
25 7046465 2 GUIDE, Rope (1/4-20 thread)
26 7024641 4 TIE, Wire 1.29” long (Black)
27 7073821 3 PIN, Bow-Tie Locking Cotter
28 7046518 1 CABLE, Traction Adjustable (51.20/6.38”)
29 7091075 5 SCREW, #10-24 x 5/8” Hex Washer Self-Tap
30 7091702 2 WASHER, 3/16” Flat
31 7026219 4 CLAMP, 7/8” Double Cable
*NOTE: Snapper part number and revision level is stamped into cable