3
Safety Rules and Information
Moving Parts
This equipment has many moving parts that can injure you or
someone else. However, if you follow all the rules in this book,
the unit is safe to operate.
The chipper/shredder has spinning blades that can amputate
hands and feet. Do not allow anyone near the equipment while
it is running! Do not place hands or feet in the hopper or
chipper cone, or discharge chute.
Thrown Objects
This unit discharges debris at high speeds. Always wear protective goggles
and do not operate without the debris bag in place. Also, do not allow anyone
in the area while the unit is running! If someone does enter the area, shut the
unit off immediately until they leave. Organize the work area prior to starting
work.
Fuel and Maintenance
Gasoline is extremely flammable. Its vapors are also extremely flammable
and can travel to distant ignition sources. Gasoline must only be used as a
fuel, not as a solvent or cleaner. It should never be stored any place where
its vapors can build up or travel to an ignition source like a pilot light. Fuel
belongs in an approved, plastic, sealed gas can, or in the fuel tank with the
cap securely closed. Spilled fuel needs to be cleaned up immediately.
Proper maintenance is critical to the safety and performance of your unit.
Be sure to perform the maintenance procedures listed in this manual,
especially periodically testing the safety system.