Filter
Top Products
6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER MID MOUNT ZERO TURNING HYDRO
DRIVE. Its purpose, aside from recommending
standard operating procedures and routine service
requirements, is to promote SAFETY through the use of
accepted operating practices. Read, Understand and
Follow the IMPORTANT SAFETY INSTRUCTIONS on
Pages 2 thru 4 of this manual and All SAFETY
messages on the unit and its attachments before
operating. SNAPPER recommends returning the unit to
an authorized SNAPPER dealer annually for inspection
and addition of any new devices which might upgrade
the safety of the mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1,
shows the essential parts of the unit. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference. For the nearest SNAPPER dealer
in your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look
for the engine manufacturer’s dealers under the
heading, ENGINES - gasoline.
IMPORTANT
The figures and illustrations in this manual
are provided for reference only and may
differ from your specific model. Contact
your Snapper dealer if you have questions
DECK LIFT PEDAL
MOTION CONTROL
LEVER
DECK LIFT
LEVER
DISCHARGE
DEFLECTOR
RIGHT HAND
FUEL TANK
OPERATOR’S
SEAT
LEFT HAND
FUEL TANK
MOTION CONTROL
LEVER
BLADE
SWITCH
HOUR
METER
ENGINE SPEED
CONTROL
CHOKE
CONTROL
KEY
SWITCH
CONTROL PANEL
(SEE INSET)
PARKING
BRAKE LEVER