Filter
Top Products
9
REMOVING THE GRASS CATCHER
1. Remove the hair pin clips (D, Figure 15) and hinge
pins (B) and remove the cover (A).
2. Remove the bags (A, Figure 16) by lifting them off
their hooks. Empty any grass out the bags.
3. Remove the long hitch pin (C, Figure 17).
4. Lift the front and back plate assembly off the spacers
(see Figure 18).
Figure 18. Detach Front & Back Plate Assembly
Removing &
Reattaching the Triple Catcher
WARNING
OPERATION WITHOUT TURBO & CATCHER
For operation without turbo, the mower deflector
MUST be properly installed in the down position and
retained by the spring latch (see turbo operator’s
manual).
Figure 15. Remove the Cover
A. Cover C. Hinge
B. Hinge Pin D. Hair Pin Clip
A
B
C
D
Figure 16. Remove the Bags
A. Bags
A
Figure 17. Install Side Brackets
A. Hair Pin Clip
B. Back Plate
C. Hitch Pin
D. Lower Spacer
A
B
C
D