Filter
Top Products
Instruction Manual No. 7102356 (Rev. C, 06/04/2008)
TP 200-5352-C-AT-N
4
Install Grass Bags
1) Align the slot on the hanger of the
Grass Bag Assembly (7500995) with
the tab on the grass bag support.
2) Insert the tab into the slot. Repeat
for all three grass bags. See Figure 4.
Install Cover Assembly
1) Attach the Cover Assembly (7500996)
to the Grass Bag Support. Insert one Hinge
Pin (M720525) into each hinge, and secure
with one Hair Pin (1960074). See Figure 5.
2) Lower the cover, and pull the latch
down over the grass bag frame. The
cover must be fully closed and latched.
Install Grass Bag Adapter
1) 46” & 52” Models Only – Attach the
Latch Pin (M720543) to the appropriate
Grass Bag Adapter, using one carriage
bolt 1/4-20x5/8 (1960252) and one
center lock flange nut 1/4-20 (1930642).
See Figure 6 (inset).
2) The Grass Bag Adapter attaches to
the deck using two bolts and two wing
nuts, provided with the kit. See Figure
6. Note – some model tractors will
already have the bolts installed in the
deck. You can use them to attach the
grass bag adapter.
3) Lift the discharge deflector. Align the
two holes in the grass bag adapter with
the holes in the deck. Note - do not
remove the discharge deflector.
4) Insert two carriage bolts 5/16-18x1-
1/4 (1960223) from inside of deck. Note
- insert forward carriage bolt first.
Secure with two wing nuts 5/16-18
(M720125). Tighten wing nuts securely.
Figure 6
Figure 4
Figure 5
Grass Bag
Adapter
42” – 7501003
46” – M720560
52” – 7102377