Filter
Top Products
2
WARNING
DO NOT operate machine without entire grass
catcher or guards in place.
STEP 4: ADAPTER INSTALLATION
Hold the adapter in front of the deck. Align the adapter lugs
with the hinge lug retainers, then push the adapter to the
rear. Loosen bolts (see Figure 4) & bump the adapter, if
necessary, to force the lugs under the lug retainers.
Secure the adapter to the deck with the previously
removed bolt, flat washer and wing nut (from step 2).
Tighten bolts. See Figure 4.
FIGURE 4
STEP 5: Cover Hood Assembly. Install sector to the
inside of cover using (3) 1/4 x 3/4” carriage bolts, 1/4 flat
washers and 1/4 hex nuts. Slide screen into cover.
Install inlet onto cover using (5) 1/4 x 1/2” carriage bolts
and 1/4 hex flange nuts. See Figure 5.
STEP 6: Cover/Frame Installation. Lower cover/frame
assembly onto bumper and secure with clevis pins and
hair pins. See Figure 6.
STEP 7: Lift cover up for access to frame. Attach center
brace to cover/frame with clevis pin and hair pin. Rotate
center brace up and hook into adapter bracket. See
Figure 7.
FIGURE 5
FIGURE 6
FIGURE 7