Filter
Top Products
www.snapper.com
Snapper Products
535 Macon Street
McDonough, GA 30253
21” STEEL DECK
WALK MOWERS
SERIES 19
1-800-935-2967
Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with
SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating perform-
ance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060
RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a
variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
Product Specifications
Deck Size 21 in
Height of Cut 1.25 - 4 in
Transmission Type Gear
Ground Speed 1 - 4 mph
Engine Power - Briggs (Quantum) 6.50 ft-lbs (gross torque)
Engine Power - Briggs (Intek) 8.75 ft-lbs (gross torque)
Engine Power - Kawasaki 6.0 hp (gross)
Engine Displacement - Briggs (all) 190 cc
Engine Displacement - Kawasaki 180 cc
Fuel Tank Capacity - Briggs (all) 1.6 qt
Fuel Tank Capacity - Kawasaki 2.1 qt
26
Common Service Parts Part Number
Cutter Blade (Air-Lift Compatible) 7019795
Drive Belt (Engine) 7046784
Drive Belt (Transmission) 7012354
Parts Manual 7006150