Filter
Top Products
2
Installation Instructions Tube and Latch Kit
A
B
C
C
C
Figure 3. Drill Adapter Plate Holes
A. Cover Plate
B. Grass Catcher Cover
C. New13/64” Hole Locations
A
B
E
C
Figure 4. Install Seal and Cover Plate
A. Cover Plate
B. Grass Catcher Cover
C. Screw, Phillips, #10-24 x 3/4
D. Seal, Rubber
E. Locknuts, ESNA, #10-24
B
E
C
C
D
2. From the inside of grass catcher (B, Figure 3) cover
use cover plate (A) as a template to drill six 13/64”
holes (C) on grass catcher cover (B) as shown.
3. Inside grass catcher cover (B, Figure 4) place the
seal (D), and cover plate (A). Secure using #10-24 x
3/4 screws (C), and #10-24 locknuts (D).